FIRST AID
AMERICAN HEART ASSOCIATION (AHA) 1. First Aid CPR and AED. / 8 hours AMERICAN RED CROSS 1. First Aid CPR, Immobilization and Transport of Victims Advanced Level. / 16 hours 2. CPR for Adults, Children, and Babies / 4 hours 3. First Aid and CPR. / 8 hours 4. Basic First Aid. / 4 hours
USE OF HAND PALLET
DURATION: 4 AND 8 HOURS. 1. Identify the key and operational components of the electric hand pallet. 2. Recognition of potential hazards associated with operation. 3. Pre-operational inspection of the equipment. 4. Safe procedure for loading, unloading, and safe mobilization within a warehouse. 5. Brake controls. 6. Theory of the center of gravity. 7. Ergonomics and operator comfort. 8. Practical evaluations within the warehouse. 9. Evaluation with load. 10. Turning radius
USE OF FORKLIFTS
DURATION: 4 AND 8 HOURS. 1. 8-Hour Course (Mandatory for First Time) 2. Basic concepts of forklifts. 3. Classification of Forklifts. 4. Applicable Legislation and Regulations. 5. Center of gravity and Stability Triangle. 6. Forklift controls. 7. Forklift inspection. 8. Lifting, moving, and placing loads. 9. Working near or inside a truck or container. 10. Parking the forklift. 11. Fueling or electrically recharging. 12. Modifications and maintenance program. 13. Lifting people with a forklift. 14. Practical exercise and Learning to Operate. 15. Theoretical exercise.
ELEVATING PLATFORM (MANLIFT)
DURATION: 4 AND 8 HOURS. 1. Causes and Results of Accidents with Manlift. 2. Pre-operational inspections according to OSHA & ANSI. 3. Recognition of the Hazards associated with Manlift. 4. Components and terminology. 5. Pre-Inspection Practical Exercise. 6. Safe Practices and Operating Procedures. 7. Operator Responsibility. 8. Working in Proximity to Energized Electrical Lines.
.jpg)
WORK AT HEIGHT
COURSE OPTIONS 1. Introduction to Work at Height / 4 hours. 2. Safe Work on Scaffolds and Correct Use of Ladders. / 6 hours. 3. Authorized Person for Work at Height. / 8 hours. 4. Competent Person for Work at Height. / 16 hours. 5. Competent Person for Work on Telecommunication Towers. / 24 hours
HOT WORK
COURSE OPTIONS 1. Hot Work. 2. Risks-PPE-Oxy cutting-Permit. 3. Welding. 4. Applications. 5. Personal Protection. 6. General Recommendations. 7. Hygienic Risks (Physical and Chemical). 8. Types of welding (Types and Risks). 9. Metal cutting (Types and Risks). 10. Safety (Gases, Vapors, Fumes, Fire, Ventilation, Humidity). 11. Risk Factors. 12. UV and Luminous Radiations - Protection (individual and collective). 13. Noise.
HANDLING OF HAZARDOUS SUBSTANCES
DURATION: 4 HOURS 1. Classification and Control of Storage of Hazardous Materials. 2. Safety Measures for Spills. 3. Personal Protective Equipment. 4. Spill Control Method. 5. Zoning of the Spill Area. 6. Soil and Subsoil Remediation. 7. Disposal of Spilled Material and Material Contaminated by the Spill. 8. Collection of Spilled Substances. 9. Use of Specialized Equipment for Spills.
ACCIDENT INVESTIGATION
DURATION: 2 HOURS 1. General Concepts 2. Starting the Investigation. 3. Effective Interviews. 4. Documenting the Scene. 5. Event Analysis. 6. Developing Solutions 7. Causality Analysis. 8. Writing Report. 9. National Legislation
CONFINED SPACES
DURATION: 8 HOURS 1. Definition of a confined space. 2. The dangers of working in Confined Spaces. 3. Recognizing what is and what are the types of confined spaces. 4. Identification of hazards: Toxic atmospheres, dangerous configurations, fire and explosion hazards. 5. Electrical Risks inside the Elevator Pits 6. Safety Program for Work in Pits according to the types of elevators. 7. The entry procedures. 8. Hazard Control Techniques. 9. Securing Confined Spaces (Lockout and Tagout). 10. Ventilation in confined spaces. 11. Personal protective equipment: Importance, use, care, and storage. 12. Measurements in the confined space. 13. Measurement equipment. 14. Interpretation of readings. 15. Atmosphere tests.
HOSE HANDLING
DURATION: 4 TO 6 HOURS 1. CARE AND MAINTENANCE OF HOSES. 2. ASSIGNMENT IN THE LINE 3. DEFINE THE COLD ZONE, HOT ZONE, WARM ZONE. 4. HANDLING AND USE OF PRESSURE AGAINST FIRE. 5. PRACTICAL SESSION OF HOSE. 6. HANDLING IN LINE
EMERGENCY AND EVACUATION MANAGEMENT
DURATION: 2 HOURS 1. DEFINITION 2. TYPES OF EMERGENCY 3. ACTION IN CASES OF EMERGENCIES 4. WHAT TO DO. BEFORE, DURING AND AFTER 5. EVACUATION ROUTES 6. PROVIDE ASSISTANCE TO VISITORS 7. DEFINE MEETING POINTS 8. CALL AND COORDINATION WITH RESCUE ENTITIES 9. ORGANIZATION AND COUNTING OF PERSONNEL AT MEETING POINT.
DEFENSIVE DRIVING VEHICLE MANAGEMENT
DURATION: 4 OR 8 HOURS 1. Introduction 2. Benefits of driving defensively. 3. Choose what you best tolerate. 4. The conditions that guide us. 5. Details about traffic law and how to fill out minor collision forms.
INTRODUCTION TO INDUSTRIAL SAFETY
DURATION: 4 HOURS 1. Fundamentals of Industrial Safety. 2. Risk Assessment. 3. Risk Control and Identification. 4. Safety Management Indicator. 5. Investigation of Accidents and Incidents. 6. Safe Work Analysis. 7. Personal Protective Equipment. 8. Material Handling and Storage. 9. Signaling System.
GENERAL ERGONOMICS, POSTURAL HYGIENE, AND ACTIVE BREAKS
DURATION: 1.5 HOURS 1. Ergonomics in work areas and postural hygiene. 2. General anatomy of the spine. 3. Causes of back pain.
FIRE PREVENTION AND USE OF FIRE EXTINGUISHERS
DURATION: 2 HOURS 1. Principles. 2. Causes of Fires. 3. Components of Fire. 4. Sources of Ignition. 5. Stages of Fire. 6. Fire Propagation. 7. Flammable and Combustible Liquids. 8. Classification of Fire Extinguishers. 9. Basic Actions for Using a Fire Extinguisher. 10. Fire Extinguisher Agents. 11. Techniques for Fighting Fires. 12. How to Act in a Fire Outbreak. 13. Review and Maintenance of Fire Extinguishers. 14. Fire Extinguisher Use Workshop.
LOCKOUT AND TAGOUT
DURATION: 4 OR 8 HOURS 1. Requirements 2. Types of Energy to Isolate 3. Types of Devices to Isolate. 4. Lockout and Tagout Process. 5. Devices for Lockout and Tagout. 6. Principles of Lockout and Tagout. 7. Activity After Lockout 8. Removal of Lockout and Tagout Devices. 9. Isolation Sheet
